Your Position: Home > Car Diagnostic Tools > XTOOL EZ400 PRO Diagnostic tool Xtool EZ400 pro Same Function As PS90 XTOOL PS90 Auto Diagnostic Tool
All Categories

View History

XTOOL EZ400 PRO Diagnostic tool Xtool EZ400 pro Same Function As PS90 XTOOL PS90 Auto Diagnostic Tool
prev zoom next
XTOOL EZ400 PRO Diagnostic tool Xtool EZ400 pro Same Function As PS90 XTOOL PS90 Auto Diagnostic Tool
  • Item NO. OBDAPK0684
  • Brand:XTOOL
  • History: 13 sold
  • Market price:USD$599.98
    Shop price:USD$499.99



  • Freight Inquiry


    Rank:comment rank 5

  • Goods Brief:




     XTOOL EZ400 PRO Diagnostic tool Xtool EZ400 pro Same Function As PS90 XTOOL PS90 Auto Diagnostic Tool

    XTOOL EZ400 Pro Features:

    Easy registration with EZ400 PRO connected to WIFI
    Wireless diagnosis via Bluetooth
    One-click software update via WIFI
    Remote access
    Diagnosis reports in PDF file
    Record and playback live data
    7 inch multi-touch screen
    On-board battery
    Extensive vehicle coverage for most US, Asian and European vehicle makes

     Top View of EZ400PRO Tablet 

    XTOOL EZ400 Pro-1

    ①MicroUSB:Battery charge or data synchronization with PC
    ②DB15 Port:Supports wired connection with car by the cable
    ③Power Button:  Power on or power off

    EZ400PRO Technical Parameters
    Operating System: Android
    Processor:Quad-core 1.6GHz Processor
    Memory: 1G RAM,16G FLASH
    Display: 7.0 inch touch screen with 1024×600 resolution
    Sensors: Gravity Sensor,Ambient Light Sensor
    Audio Input/Output: Microphone, Dual Speakers, 4-Band 3.5 mm stereo/standard headset jack
    Power and Battery: 4000mAh, 3.7V lithium-polymer battery
    Power Voltage: 5V
    Power Consumption: 8W
    Operating Temperature: -20 to 50℃(-4 to 126℉)
    Humidity: <90%
    Dimension (L*W*H): 218*150*29mm

    Tap on EZ400PRO application, the main interface and sub-menus shows up as below.

    XTOOL EZ400 Pro-2

    Vehicle Connection Test
     Wired Connection  ①→②→③→④
    a. Connect cables and EZ400PRO in following order: ①→②→③→④
    b. Switch on the ignition and turn on EZ400PRO tablet, then tap on EZ400PRO application to test vehicles. (Shown as follows)

    XTOOL EZ400 Pro-3

    ① EZ400PRO Mainframe  ② Main Test Cable  ③ OBDⅡ-16  ④ Vehicle

     Precautions Before Use

    1. The vehicle power supply has to meet the normal voltage limits DC4.8V---5V.
    2. When pull and plug test wire harness, users should pinch the front-end of the wire harness to pull and plug, not pull the middle section
        of the wire harness. Users should check the corresponding direction of the port and plug in horizontally when they plug the wire harness,
        instead of inserting in an oblique way, which may damage the terminal.
    3. When taking some special functions tests, users are required to operate the device according to operating instructions. For vehicle,
         it has to strictly meet the requirements, for example, the conditions that some vehicle models need to be reached are as follows:
         engine temperature 80℃/105℃,turn  off the loads (such as headlights, air-conditioner, etc.), put accelerator pedal in released position, etc.
    4. The ECU for Chinese domestic vehicle models are relatively disorderly, so when users meet conditions, such as the car can not be tested or
         the test data is wrong, they should consider whether the selected menu corresponds to the tested electronic control system, or they can find the
         car ECU and select the right menu according to the model number on the ECU label.
    5. If users can not find the tested vehicle model or electronic control system in EZ400PRO test menu, they may need to update the software or
         consult Xtool technical service department
    6. Banned to have connection test by using harness not from Xtool to avoid unnecessary losses.  
    7. Banned to power off directly in the communication between EZ400PRO and vehicle. Users should cancel the task and return to the main
         interface, then power off.
    8. The device should be put and lifted slightly to avoid collision when using EZ400PRO. When click the screen, touch it gently to guarantee
         the service life of the touch screen.
    9. During long period of non-use, please disconnect the power and turn it off.

    After EZ400PRO tablet connected to vehicle via main cable, diagnosis can be performed now.
    The diagnostic interface comes up as below.

    XTOOL EZ400 Pro-4

    Users can choose menu based on their actual needs: 
    selection for Europe means entering European cars menu, selection for Asia means entering Asian cars menu, selection for America
    means entering American cars menu, selection for China means entering Chinese cars menu. Users also can input vehicle model to search.
    Test Functions 
    Take Volkswagen car for example, select Diagnosis, then select Europe Car, users can see Volkswagen’s logo. If the logo has not been seen,
    please swipe up and down or enter the car model to research.

    XTOOL EZ400 Pro-5

    Different vehicles have slight different menus.
    Common main function menu includes the following options: 

     Read ECU
    This function is to read ECU version information, which is the equivalent of “System Identification” or “System Information” in some
    electronic control systems, all mean to read ECU related software and hardware versions, shown as below.

    XTOOL EZ400 Pro-6

    Read DTCs 
    Select Read Trouble Codes to read trouble codes stored in ECU. Screen will show the trouble code and its definition when read the trouble
    codes, shown as below.

    XTOOL EZ400 Pro-7

    Tip: In the process of diagnosis, if the device shows “System is OK” or “No Trouble Code”, it means there is no related trouble
    code stored in ECU or some troubles are not under the control of ECU, most of these troubles are mechanical system troubles
    or executive circuit troubles, it is also possible that signal of the sensor may bias within limits, which can be judged in Live Data.
    Clear DTCs
    Return to the previous step, select Clear DTCs to clear current and historical trouble codes memory in ECU. Performing this function
    will clear all the current and historical trouble codes. Make sure whether the trouble codes have been recorded before clearing, shown as below.

    XTOOL EZ400 Pro-8

    Click YES to make clear confirmation, if the communication is normal, it will show “Trouble Codes Successfully Cleared” or
    “Trouble Codes Cleared”. Generally, users need re-read trouble codes after cleaning them to confirm whether the trouble codes
    have been cleared.

    Read Live Data
    Auto ECUs send out operating parameters and working status of various components in the form of Electronic Signal, here Electronic Signal
    refers to Live Data. Common Engine Live Data includes Engine Speed, Throttle Position Sensor Voltage, Oxygen Sensor Voltage, Coolant
    Temperature, Spark Advance Angle, Idle Speed Switch State, Intake Air Temperature, Intake Pressure, etc.

    XTOOL EZ400 Pro-9

    Tips: Live Data is the important function for maintenance technicians to further diagnose the troubles. This function needs maintenance
    technicians very familiar with sensor data of each system, control signals and control modes, all which are the indispensable basis of using
    Live Data function for maintenance technicians.

    Display Modes
    There are two modes to view Live Data, users can choose optimum mode according their own needs and different parameter types.
    Dashboard Mode: Display parameters in the form of simulating instrument graphics.
    Graph Mode: Display parameters in the form of graph.

    XTOOL EZ400 Pro-10
    XTOOL EZ400 Pro-11

    Special Functions
    More special function will be found in different vehicle models. 

    XTOOL EZ400 Pro-12

    Actuatation/Ative/Components Test
    Test Conditions: Ignition on engine off
    If engine started or rotation speed signal recognized, actuating component diagnosing will be interrupted.
    In the process of actuating components diagnosis, single component will always be in the trigger status until the next component being activated. 
    Before repeating actuating components diagnosis, users should start engine in short-time, or turn ignition off for 2 seconds. 
    Actuating components can be checked by hearing or touching.
    In the process of all actuating components diagnosis, electric fuel pump is always working.
    10 minutes later, actuating components diagnosing is terminated.
    Actuating Component: it is responsible for executing various instructions issued by ECU, which is the instruction completer.

    XTOOL EZ400 Pro-13

    Return to Dynamic Diagnostic Data, enter Actuating Components Test and it will show the menu of the actuating components
    that carry out action test, shown as below.

    XTOOL EZ400 Pro-14

    Tip: Actuating Components Test performs function tests for parts of system actuating components. When performing this function,
    the diagnostic tool will take action test by simulating ECU signal to judge whether the actuating components or circuits are good. 
    Return to Dynamic Diagnostic Data, enter Actuating Components Test and it will show the menu of the actuating components that carry out action test.

    Select enter Settings; users can set the language, unit and other system related options:
    Languages: select the language. Please tick the needed option from multi-language options on the right.

    XTOOL EZ400 Pro-15

    Units: Select unit of measurement. Users can tick Metric or English measurement. 

    XTOOL EZ400 Pro-16

    System Settings: Android system setup, such as wireless, audio frequency, light sensation, etc.

    Package List:
    1pc x OBD II-16
    1pc x HONDA-3
    1pc x BMW-20
    1pc x TOYOTA-17
    1pc x MAZDA-17R
    1pc x KIA-20
    1pc x HYUNDAI/KIA-10
    1pc x NISSAN-14
    1pc x GM/DAEWOO-12
    1pc x SELFTEST
    1pc x UNIVERSAL-3
    1pc x SUZUKI-3
    1pc x FIAT-3
    1pc x CITROEN-2
    1pc x AUDI-4
    1pc x MITSUBISHI-12+16
    1pc x BENZ-38
    1pc x BENZ-14
    1pc x MAINCABLE
    1pc x Battery Cable
    1pc x Cigar Lighter Cable
    1pc x EZ400PRO Tablet
    1pc x Charger for Tablet
    1pc x Charger US Adapter 
    1pc x Charger EU Adapter
    1pc x MicroUSB Cable
    1pc x Tool Case
    1pc x Certificate of Quality
    1pc x Packing List
    1pc x User Manual
    1pc x Carton

    Contact Information:

    Whatsapp: +1 937 888 0032

    Live Support: Chat with us online



    If you have any problem, please do not hesitate to contact us.

    User Comment(Total0User Comment Num)

    • No comment
    Total 0 records, divided into1 pages. First Prev Next Last
    Username: Anonymous user
    Verification code: captcha
    Company Info
    Why Shop at
    Working Hours
    Our Guarantee
    Payment & Shipping
    Delivery Options
    Payment Methods
    Shopping Guide
    Delivery Cost
    Customs & Import Tax
    Customer Service
    Contact us
    Forget your account password
    Track Your Order
    Tips to use OBDTOOLS.NET
    Company Policies
    Products Warranty
    Refund Policy
    Return Policy
    Privacy Policy
    Return for repair
    Other Business
    Home | Shopping Guide | Delivery Options | Return Policy | Contact US | About